#RADIUS NETWORKS RADBEACON MOBILINC UPDATE#
#RADIUS NETWORKS RADBEACON MOBILINC BLUETOOTH#
#RADIUS NETWORKS RADBEACON MOBILINC FREE#

The RedBeacon E is available in four form factors: E4, E8, Card, and Chip. Supported beacon proximity technologies include:

#RADIUS NETWORKS RADBEACON MOBILINC FREE#

Configure it the way you want it using your mobile device with the free RadBeacon App for iOS or Android. As the industry’s first multi-beacon, with concurrent support for all major industry-standard proximity technologies, the RadBeacon enables simultaneous proximity services across iOS, Android, and other emerging mobile environments.

The RadBeacon E has 5 configurable beacon advertisements, so you can pick the identifiers you want for your project. The RadBeacon E is perfect for a wide range of applications such as mobile app engagement, asset tracking, location-based advertising, and more.įully Configurable Multi-Beacon Technologyĭon’t get stuck with IDs from your beacon vendor that might overlap with other deployments.

#RADIUS NETWORKS RADBEACON MOBILINC BLUETOOTH#

The RadBeacon E Series is a family of fully stand-alone Bluetooth proximity beacons that supports iBeaconTM, AltBeaconTM, and EddystoneTM technology. This micro-location proximity awareness can be leveraged to deliver a wide range of new innovative solutions, such as right-place, right-time customer notifications, precision indoor navigation, automatic ticketing, guided tours, and location-relevant offers and promotions. The short range, low power, Bluetooth Smart transmitters notify mobile devices when they come within range of a beacon. In order to re-enter normal operational model, simply remove and replace power to the device.Radius Networks is the leading proximity beacon provider.

#RADIUS NETWORKS RADBEACON MOBILINC UPDATE#

Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.

Radius networks radbeacon mobilinc